Romulus augustulus
kiwifarms.net
- Registrado
- 6 de Abr, 2023
is there any validity to the thought of buying a .30 cal can for use with .30 cal, 6.5, .277, 6mm or 7mm etc? does that work at all?
Mega Rad Gun Thread
- Iniciador del tema The Hunter
- Fecha de inicio
-
🇵🇦 Nuestro primer dominio localizado está en español en kiwifarms.pa. Our first localized domain is on Spanish on kiwifarms.pa.
-
Want to keep track of this thread?
Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
Create account
- Registrado
- 13 de Dic, 2022
They work pretty good, not as good as the correct can but 90%as good
you can even swap the end cap on a few models to get closer to the correct size.
74164978231
kiwifarms.net
- Registrado
- 4 de Ago, 2022
Of course it works and it was the norm up until the last year or two when companies started making really niche caliber sized cans.
Imo if on a budget no reason not to get a 762 can. The sound difference is absolutely minimal and you will have something much more versatile.
- Registrado
- 7 de Sep, 2024
- Registrado
- 16 de Ago, 2024
GunBroker.com: Yeah it's a solid $200, lowballers don't bother.
- Registrado
- 7 de Sep, 2024
should I make a prospering grounds thread on r/transguns? it's a complete hellhole
- Registrado
- 7 de Ago, 2025
Hmm... let me check out the subreddit to see if it's worth it... here's a promising post:
my first time shooting an AR | archive
this troon didn't shoulder his full auto AR and shot the ceiling of his rangeI'd say go for it, I bet between this subreddit, r/liberalgunowners and r/InRangeTV there'd be some interesting/funny content.
ellroy
kiwifarms.net
- Registrado
- 2 de Feb, 2021
It’s not even not shouldering. Gripping the mag well weakly while going full auto isn’t going to bode well.Hmm... let me check out the subreddit to see if it's worth it... here's a promising post:
my first time shooting an AR | archive
fullautotroon.mp4
I'd say go for it, I bet between this subreddit, r/liberalgunowners and r/InRangeTV there'd be some interesting/funny content.
I hope the boomer RSO got to execute him with his Rock Island 1911.
- Registrado
- 7 de Sep, 2024
I distinctly remember seeing a video of the tranny shooter from Canada become one of the most upvoted posts on the sub (before the shooting ofc). It was the one where he was shooting a desert eagle with the "AK world tour" black sweatshirt on; while the video is still out there the original post is probably long gone. It was still freaky as fuck seeing that, thinking nothing of it, then hearing of the school shooting and realizing it was that person. Now unrelated, but there's at least one troon (probably multiple) making unholy parts kit creations on r/gunnitrust (which is kinda fucked up cuz beside the minor infestation that sub is great). And by unholy, I mean really unholy mashed together shit, worse than the shovel receiver AK. I'll make the thread sometime soon.
- Registrado
- 5 de Sep, 2022
What are some of these newer flow through so I know what to look for? Do they do a 50/50 split between back pressure and sound/flash or do they still kill the back pressure while keeping sound and flash low?
74164978231
kiwifarms.net
- Registrado
- 4 de Ago, 2022
They'll be marketed as "reduced back pressure" or "flow through" suppressors. They do noticeably reduce gas blowback at the expense of noise reduction. Usually it's a few decibel depending on design for much less gas, very worthy trade off for semi auto firearms. Zero use on a bolt gun.
More or less if it's a newer suppressor and it's 3d printed it's a flow through suppressor. The bt I mentioned is a flow through, as well as being a hybrid titanium/inconel design so it's light weight yet extremely rugged if you ever feel the need to dump 5-6 mags of 7.62 through it in a few minutes. You really cant beat that for the price.
Última edición:
- Registrado
- 5 de Sep, 2022
Oh I thought he meant a new new type of flow through. Existing flow throughs tend to heat up very fast and have poor flash suppression even when they're made of inconel, no?
74164978231
kiwifarms.net
- Registrado
- 4 de Ago, 2022
The all titanium ones can be bad about flash suppression due to the nature of titanium but the ones with inconel blast baffles are supposed to be much better at that. Sage dynamics did a video on the bt print x hybrid that shows the difference.
- Registrado
- 19 de Ene, 2021
I don't know if there's a universal term for these, but there's a general tendancy towards 3-d printed cans with internal geometry allowing both low back pressure and decent performance. Pewscience calls these "hybrid cans". CAT calls their version of this "surge bypass", but the different manufacturers all seem to have their own name for it. The various CAT cans, the SAW Tisha, the PTR vent, and so on are examples. Each is going to be a bit different, but generally they have low back pressure with much better performance than older flow through cans had. I'd look into the cans individually, and I don't know if any of them dissipate heat well, but generally they seem like an improvement (often at twice the cost, unfortunately).
- Registrado
- 15 de Sep, 2021
If you go this route be very careful about the right end cap with the right rifle. There are 2 different locals I've run into who have shot off their end cap because they didn't change the cap when they changed the rifle.
74164978231
kiwifarms.net
- Registrado
- 4 de Ago, 2022
- Registrado
- 18 de Mayo, 2020
In 2026 is you're shooting something semi or full auto and not running a flow through can.... Bruh
I'd honestly even have one on a bolt action as it slightly lessens the cancer gasses (mmmm lead) coming out of the chamber when you cycle the action vs a closed can.
Speaking of cans, that one looks great for my RPR in 6.5mm CM....
Dusty Old Bones
kiwifarms.net
- Registrado
- 12 de Sep, 2020
I'm of the opinion that every bad shooting habit of a troon should be reinforced. On the off chance he's not shooting up a school or church, or self addressing, he'll be "defending " himself from "nazis".
I want him pulling back on the mag, then looking down the barrel while clearing subsequent jam.
- Registrado
- 6 de Feb, 2023
But then you don’t get to grift the government (and by extension the taxpayer) out of millions of dollars for cartridge development costs.
Laminated Flooring Panel
kiwifarms.net
- Registrado
- 14 de Feb, 2025
And the B&T saga looks like it is slowly being wrapped and finished!
"B&T AG regains full control of the B&T brand in the United States
B&T AG has reached a comprehensive settlement, resolving all outstanding disputes between the parties. As part of this agreement, all pending litigation will be dismissed, enabling both parties to move forward under a clearly defined transition framework.
Now that the legal matters have been resolved and the U.S. trademarks are back under the control of B&T AG, we are pleased to announce that a new, wholly Swiss-owned U.S. operation will be established later this year. This is an exciting new chapter for B&T in the United States, ensuring that customers will again experience the Swiss engineering, uncompromising craftsmanship and premium service that define B&T.
We are currently establishing the necessary infrastructure, licenses, and team in the United States to provide a reliable supply chain, customer support, and direct access to authentic, Swiss-made products and accessories. We are also looking forward to introducing our range of Swiss suppressor designs to the US market, while continuing to support existing B&T platforms.
Having listened carefully to feedback from the US market, we remain fully committed to delivering the quality, service, and long-term customer support that our customers have come to expect from B&T. The establishment of this Swiss-owned operation reflects our commitment to safeguarding the brand's integrity and maintaining the highest service standards for years to come.
If you would like to be part of this exciting new chapter, please stay tuned for updates on our website.
We look forward to sharing more with you soon."
Source
"B&T AG regains full control of the B&T brand in the United States
B&T AG has reached a comprehensive settlement, resolving all outstanding disputes between the parties. As part of this agreement, all pending litigation will be dismissed, enabling both parties to move forward under a clearly defined transition framework.
Now that the legal matters have been resolved and the U.S. trademarks are back under the control of B&T AG, we are pleased to announce that a new, wholly Swiss-owned U.S. operation will be established later this year. This is an exciting new chapter for B&T in the United States, ensuring that customers will again experience the Swiss engineering, uncompromising craftsmanship and premium service that define B&T.
We are currently establishing the necessary infrastructure, licenses, and team in the United States to provide a reliable supply chain, customer support, and direct access to authentic, Swiss-made products and accessories. We are also looking forward to introducing our range of Swiss suppressor designs to the US market, while continuing to support existing B&T platforms.
Having listened carefully to feedback from the US market, we remain fully committed to delivering the quality, service, and long-term customer support that our customers have come to expect from B&T. The establishment of this Swiss-owned operation reflects our commitment to safeguarding the brand's integrity and maintaining the highest service standards for years to come.
If you would like to be part of this exciting new chapter, please stay tuned for updates on our website.
We look forward to sharing more with you soon."
Source
