🌟 Internet Famous Linus Gabriel Sebastian & Linus Media Group / Linus Tech Tips - Narcissistic corporate shill YouTuber driving his media empire into the ground. KILL COUNT: 2

In this video, he mentions that it's "substantially thinner" than his current daily driver. It's really not that much thinner at all, maybe 10% max.
Thinner where? It looks like the silver one just has shorter feet.
IMG_4493.jpeg
With the extremely detailed forensics of drawing a red line and copying it, the laptops seem to be the same.
 
Is he aging faster, or is it just that I don't watch his videos anymore?
Its harder to hide aging when you're outside and not under studio lighting. Combine natures illumination with his insistence on trying to look like a 20somethings college kid in that photo, and it makes him look older still.

Linus honestly doesn't look too bad for being just about 40, but he's getting to that age where he needs to stop pretending to be 20 and change up his look.
 
I hate this nigger so much


You now are nigger rigging an A/C, DO YOUR BIG ELECTRICAL REWIRING FIRST, FOR THE LOVE OF GOD!

He's going to have so much shit sticking out of the house and barn and then be in denial about it all. In the south we like good old central air, but I've installed a mini split for my Grandma and it was incredibly easy because the point is one room or back area of the home. The whole point of them is to do one room, not this frankenstein thing you're doing where you're also trying to duct it, I feel the pain of this house as it gets ripped apart because a fat white ginger jeet who doesn't know what he's doing because leYoutube, milady.

This video is the filmmaking symbolism of a tranny, the parts don't work, you think you can deceive everyone, but it's all just an ever growing mess. I pray everyone sends his eventual homeowner's insurance company this video to make sure they deny any electrical and moisture claims in the future. Everyone who just says "I'm going to 3D print....." I'm just going to deport you to an Ebola country, fuck you all, it's as annoying as "I'll have AI make an app."
 
I hate this nigger so much

https://youtube.com/watch?v=8R3fI9Wo3NM
You now are nigger rigging an A/C, DO YOUR BIG ELECTRICAL REWIRING FIRST, FOR THE LOVE OF GOD!

He's going to have so much shit sticking out of the house and barn and then be in denial about it all. In the south we like good old central air, but I've installed a mini split for my Grandma and it was incredibly easy because the point is one room or back area of the home. The whole point of them is to do one room, not this frankenstein thing you're doing where you're also trying to duct it, I feel the pain of this house as it gets ripped apart because a fat white ginger jeet who doesn't know what he's doing because leYoutube, milady.

This video is the filmmaking symbolism of a tranny, the parts don't work, you think you can deceive everyone, but it's all just an ever growing mess. I pray everyone sends his eventual homeowner's insurance company this video to make sure they deny any electrical and moisture claims in the future. Everyone who just says "I'm going to 3D print....." I'm just going to deport you to an Ebola country, fuck you all, it's as annoying as "I'll have AI make an app."
It will take years for him to recover from LTT retardation. We can only wish him a speedy recovery.
 
Some of us have been gaming exclusively on Linux since Loki games sold boxed copies in stores, your market share insults have zero effect on the callused hands that patched a fork of wine in 2002 to play half life.
a friend in the boyz whatsapp group has been yapping months and months about how he installed bazzinto o bazzinga or whatever and is fine tunning everything just to install the fucking windows store because he pays for game pass. the rest of us is going why?
 
Última edición:
I hate this nigger so much

https://youtube.com/watch?v=8R3fI9Wo3NM
You now are nigger rigging an A/C, DO YOUR BIG ELECTRICAL REWIRING FIRST, FOR THE LOVE OF GOD!

He's going to have so much shit sticking out of the house and barn and then be in denial about it all. In the south we like good old central air, but I've installed a mini split for my Grandma and it was incredibly easy because the point is one room or back area of the home. The whole point of them is to do one room, not this frankenstein thing you're doing where you're also trying to duct it, I feel the pain of this house as it gets ripped apart because a fat white ginger jeet who doesn't know what he's doing because leYoutube, milady.

This video is the filmmaking symbolism of a tranny, the parts don't work, you think you can deceive everyone, but it's all just an ever growing mess. I pray everyone sends his eventual homeowner's insurance company this video to make sure they deny any electrical and moisture claims in the future. Everyone who just says "I'm going to 3D print....." I'm just going to deport you to an Ebola country, fuck you all, it's as annoying as "I'll have AI make an app."
I hate the way this faggot talks. It must be like what a Reddit meetup sounds like.
 
Linus uploaded a video today showcasing and educating the audience about Ionic Cooling devices.


The catch? They already did this video, a year ago. Basically the exact same video. Showcasing and educating the audience about Ionic Cooling devices.


Funny enough, Alex does a BETTER JOB of showcasing it than Linus does. He has a more educational video and seems to actually have brushed up on the source material before recording, in spite of the fact that he was doing so in extremely limited time at a convention vs Linus having a fully scripted video with unlimited time.

When called out on it in the YouTube comments, Linus responds:
1780529149391.png
 
I hate this nigger so much

https://youtube.com/watch?v=8R3fI9Wo3NM
You now are nigger rigging an A/C, DO YOUR BIG ELECTRICAL REWIRING FIRST, FOR THE LOVE OF GOD!

He's going to have so much shit sticking out of the house and barn and then be in denial about it all. In the south we like good old central air, but I've installed a mini split for my Grandma and it was incredibly easy because the point is one room or back area of the home. The whole point of them is to do one room, not this frankenstein thing you're doing where you're also trying to duct it, I feel the pain of this house as it gets ripped apart because a fat white ginger jeet who doesn't know what he's doing because leYoutube, milady.

This video is the filmmaking symbolism of a tranny, the parts don't work, you think you can deceive everyone, but it's all just an ever growing mess. I pray everyone sends his eventual homeowner's insurance company this video to make sure they deny any electrical and moisture claims in the future. Everyone who just says "I'm going to 3D print....." I'm just going to deport you to an Ebola country, fuck you all, it's as annoying as "I'll have AI make an app."
Ducted minisplits can make sense BUT... if you're just going to build it into the fucking wall at the edge of the room and use huge registers there isn't much point. What it can make sense for, is installing it in the 2nd floor of the home as he's doing, so he can have ducts on that floor, and then just install a couple of ducts and registers in the ceiling for the 1st floor where needed. That way you're still only using one air handler, but can still heat and cool multiple zones.

Now why this retard did all of this before the electrical... just like his last video do the fucking electrical FIRST. Fuck, he couldn't even get spade terminals and went with rings that aren't even the right size, and then crimped them wrong? He made a joke about not doing shit to code and basically filming evidence for his insurance company... yeah that's exactly what he's doing, the fucking idiot.

The catch? They already did this video, a year ago. Basically the exact same video. Showcasing and educating the audience about Ionic Cooling devices.
Yeah but he's at computex and the lisping faggot needs to get all of the easy content he can. Plus his consoomer brained audience has shit for memory anyway so they'll continue to "ooh" and "ahh" over the same meaningless crap. Besides, there's been solid state and piezo-electric fans and shit shown off for years, and it's still not ready for prime time. The fact that this particular ionic thrust version requires a fucking mechanical wiper to periodically dust it, means it's fucking worthless IMO.
 
Linus uploaded a video today showcasing and educating the audience about Ionic Cooling devices.
IDK is that's another "white girl problem" but fan noise never bothered me, playing with headphones or not and even on silent environments but doesn't ionic cooling requires high voltage?

The thing that worries me is that I remember that back in the late 2000's when cheap laptops were getting mainstream most of them used CFL as display backlight, CFL also needs high-voltage and I remember that it wasn't uncommon to hear about displays and motherboard getting fried because something(loose connection, bad design, ....) shorted the motherboard/display and you would need to replace the entire display or the entire motherboard
 
Linus uploaded a video today showcasing and educating the audience about Ionic Cooling devices.

https://youtube.com/watch?v=Q9FiuoXzEEA
The catch? They already did this video, a year ago. Basically the exact same video. Showcasing and educating the audience about Ionic Cooling devices.

https://youtube.com/watch?v=2lTWI7kfkt0:21
Funny enough, Alex does a BETTER JOB of showcasing it than Linus does. He has a more educational video and seems to actually have brushed up on the source material before recording, in spite of the fact that he was doing so in extremely limited time at a convention vs Linus having a fully scripted video with unlimited time.

When called out on it in the YouTube comments, Linus responds:
Ver archivo adjunto 9096846
Oh wow, this looks like an intentional jab at the departed staff member lol
Are they going to redo all of the old content from people that escaped? If Luke ever leaves I'm betting that Linus would make all the WAN Show videos private out of spite.
 
1.JPG

Extracted.JPG

(Extracted)

Only a few days after getting caught using Gemini AI for a thumbnail and lying to say "Actually we just touched up a picture with it but the picture is real, honest guys!", Linus jumps straight into the fire by having a clear, fully generated AI thumbnail.

The doublethink on his official reddit isn't taking it too well. People pointing out it even fails the synthid check get downvoted because....?
Synth.JPG
 
Ver archivo adjunto 9114137
Ver archivo adjunto 9114138
(Extracted)

Only a few days after getting caught using Gemini AI for a thumbnail and lying to say "Actually we just touched up a picture with it but the picture is real, honest guys!", Linus jumps straight into the fire by having a clear, fully generated AI thumbnail.

The doublethink on his official reddit isn't taking it too well. People pointing out it even fails the synthid check get downvoted because....?
Ver archivo adjunto 9114150
You don't need synth ID the CPU heatsink has fucking VGA and 3,5" HDD bays.
 
Última edición:
I hate the way this faggot talks. It must be like what a Reddit meetup sounds like.
Most of the LTT staff talks with this same cadence and with the same brand of painfully outdated lolquirky Reddit humour. It's the second most important aspect of their company culture (the most important aspect is being willing to shill pretty much anything for a few kikebux)
 
Now why this retard did all of this before the electrical... just like his last video do the fucking electrical FIRST. Fuck, he couldn't even get spade terminals and went with rings that aren't even the right size, and then crimped them wrong? He made a joke about not doing shit to code and basically filming evidence for his insurance company... yeah that's exactly what he's doing, the fucking idiot.
Often you will see people on YouTube do something really important wrong, and they say, "Meh, it works."

Some monkey wired up my LandRover incorrectly (they used some silicon sealant stuff instead of a plastic plug) and put incorrect fuses in, and guess what? I almost had a bunch of melted wiring behind my dashboard. If he had put the correct fuse in, the wires wouldn't have melted. I had to pull the entire dashboard out to assess the state of the damage and then repair the loom myself properly. All because the mongoloid couldn't be bothered to put the correct plastic plug in that costs £5.

It is "Meh, it works" until it starts melting shit and potentially starting a fire.
 
Atrás
Top Abajo