Mega Rad Gun Thread

[BikeLock]

Holy shit, the absolute state of Siggers.

Fucking international Ordinance AK’s don’t come this fucked up.

The machining on my Saiga puts that to shame.

"Fit and finish" on actual Russian rifles is legendarily "If it works, its fine." lmao. You can scrape the paint off with your fingernails.

Real sad shit for a $3k+ "top of the line" rifle.

Ver archivo adjunto 9166771Ver archivo adjunto 9166786
Ver archivo adjunto 9166790

Chillax bro, those guns from the evidence locker aren't going anywhere anytime soon!

 

[East_Clintwood]

Speaking of Sig Saar.
https://www.reddit.com/r/NFA/comments/1u6kkv6/how_my_68_sig_spear_came_from_the_factory/

Luckily I was able to fix the rail but I’m just going to have to ignore the amateur levels of machining on that BCG.

No matter how much you hate SIGgers it's never enough.

Corner Shot but with Revolver

I love this thing so fucking much. This is the exact sort of stupid bullshit I'd make in Shadowrun (shout out to that time I put an under barrel grenade launcher on my assault rifle that came with an integral under barrel grenade launcher already)

 

[Taser Confetti]

I’m

"Fit and finish" on actual Russian rifles is legendarily "If it works, its fine." lmao. You can scrape the paint off with your fingernails.

At least I bet the barrel isn’t crooked on anything Russian. Sig’s QC would probably get you executed for treason in a USSR factory.

 

[BikeLock]

I’m


At least I bet the barrel isn’t crooked on anything Russian. Sig’s QC would probably get you executed for treason in a USSR factory.

I mean, you always have to watch out for canted Front Site Blocks because drunken slavs, but mine is straight at least.

 

[Fount of BadSpeak]

A couple companies make "Full profile" holsters for it if you are only using irons on it, if you have optics on it you will probably have to reach out to a custom holster company to get one that covers the entire slide. Or you can just be gay and wear like a strip of silk around your torso.

I'd look at modifying the gun a bit, smoothing the sights and that side of the grip. Undershirt would and does help but fuck that shit too.
This video has a good section talking about it, but the general idea I got is that carry guns should be smoother and whatnot as although it makes them harder to use it's really not THAT much harder and the pros far outweigh a section of your grip being smoother.

https://m.youtube.com/watch?v=eWcyYRi3D50

My issue is the barrel/slide of my G48 jamming into my right inner thigh but that's solved alright by tucking my shirt to cover that area. I think I'll look into adding a fleece part in that area so I'm not appendix open carrying if I don't have a sweatshirt on. I'm tempted to get a G43X but I'd be bummed to drop like 700 to have the same thing which is probably likely.

I've never personally used them, but I'm pretty sure this is the exact usecase for hybrid holsters. Kydex for retention with leather on all the parts that contact your body.

I personally suck it up and wear an undershirt but I don't want to buy yet another holster.

AlienGear makes these for use as sweat guards for their Photon IWB holsters. I'd imagine you could modify your holster a bit to stick that on after trimming it to size.

I really appreciate the information, gentlemen.

 

[God's drunkest driver]

Do you guys know of any kind of barrier for in the waist band carry to help with rubbing against the gun? I have been every day carrying the S&W Shield Bodyguard 2.0 every day at work for 12 hour shifts, and while it's usually fine, sometimes when I move a certain way, the sharp rear sights scratch my stomach, or the stippling rips across my side like sandpaper. It's even worse in appendix, as there is a lot of awkward movements, crouching, bending over, crawling, climbing ladders etc. involved. There's no injury, or even lasting mark, but it feels really unpleasant.

As for "wear an undershirt", well, it's hot as fuck and I don't want to wear more clothing.

Wear an undershirt, nigga. Or get a hybrid holster, or carry the pocket pistol in your pocket instead of AIWB.

Ver archivo adjunto 9152430
IM TIRED BOSS

No SKS ever has or ever will be worth more than $450 and no Mosin Nagant not owned by Simo Häyhä himself ever has been or ever will be worth more than $250.

 

[Romulus augustulus]

Moving on, why in the fucking hell won't CZ make one of these with a steel receiver?! What fucking retards make these types of decisions?

Cause the tactitards are leaking into bolt actions now. it's for muh light weight on muh dall sheep hunt!

nevermind that some one that can afford to hunt sheep or high mountains is sure as hell gonna spend the extra money on a custom rifle, not some cheap CZ piece of shit.

 

[Marvin]

Picked up my CMP M1911 today:

 

[Null]

I need to go shooting again this weekend

 

[Local Hooker]

Picked up my CMP M1911 today:
Ver archivo adjunto 9168664

From how they were described I was expecting a vaguely 1911 shaped rust bucket, but that's not bad at all. I may have to look into getting one.

 

[Romulus augustulus]

From how they were described I was expecting a vaguely 1911 shaped rust bucket, but that's not bad at all. I may have to look into getting one.

Some of them (maybe most?) were rebuilt before long term storage.

 

[Taser Confetti]

Picked up my CMP M1911 today:
Ver archivo adjunto 9168664

Did it come with that case?

 

[Local Hooker]

I really don't understand how S&W was unable to put a threaded barrel on their M&P 10mm. The whole gun was pretty obviously based on the .45 ACP model, which does have threaded barrel options. Despite the fact that 10mm<11.5mm, they still managed to make the 10mm barrel too thin to thread. It's baffling.

 

[Taser Confetti]

I really don't understand how S&W was unable to put a threaded barrel on their M&P 10mm. The whole gun was pretty obviously based on the .45 ACP model, which does have threaded barrel options. Despite the fact that 10mm<11.5mm, they still managed to make the 10mm barrel too thin to thread. It's baffling.

10mm isn’t exactly a caliber that’s friendly to suppressing anyways.

 

[Marvin]

Did it come with that case?

Yeah, it's a pretty polished little package. Sturdy, hard side case with the cutout foam slots. It's a nice little touch.

I guess they could've just shipped them in cardboard.

 

[Taser Confetti]

Yeah, it's a pretty polished little package. Sturdy, hard side case with the cutout foam slots. It's a nice little touch.

I guess they could've just shipped them in cardboard.

I would have figured they would have shipped it in cardboard honestly. That’s awesome that they actually give a damn and ship it in that. Which manufacturer did you get?

 

[Local Hooker]

10mm isn’t exactly a caliber that’s friendly to suppressing anyways.

It's not about the practicality, it's about the fun.
Also I really just want an aftermarket compensator because the M&P 10 with the ported barrel was ugly.

 

[Taser Confetti]

It's not about the practicality, it's about the fun.
Also I really just want an aftermarket compensator because the M&P 10 with the ported barrel was ugly.

I like M&P’s but I’m not a 10mm guy at all. Apparently KKM thinks the wall thickness of the chamber isn’t sufficient in their minds.

10mm is still a hipster cartridge and you’re best off just getting a Glock 20 if you wanna be experimental honestly.

As a 45 Super fag I’m sympathetic.

 

[Marvin]

Which manufacturer did you get?

Remington.

 

[Taser Confetti]

Remington.

Can’t go wrong with that. Were you already a 1911 fag or did you just join the cult? I’ve always liked these for not killing the GI vibe and still being an amazing magazine.